The spray of this product is wide, flat, and low recoil. The body is a one-piece structure, and the material can be bronze, brass, or stainless steel, which makes it light and strong. It is suitable installation on all types of tanks for the best spraying, cooling, and protection functionality. Purchase information: If you cannot decide the specifications of your purchase, please provide any two of the Q (flow), P (inlet pressure), or K value data, and the Company will help you calculate and manufacture the product based on the specifications you need. Model : 1/2"SD

This product uses the water pressure of the fire hose to press the bag in the tank so that the foam concentrate in the bag can be mixed with the water in the fire hose in the mixer into the 3% or 6% water/foam mixture according to the preset volume. The mixture will then flow through various foam generators in the protected area and generate foam to extinguish the fire. In addition, the mixture ratio stays the same whether the water pressure in the main hose rises or drops. Model : CD-G

This product is not suitable for Type C electrical fire and Type D metal fire This product consists of 30 gallons (114 liters), folding fire hose foam tank, auto-suction foam mixer, ratio adjuster, 1-1/2" fire hose, foam nozzle, and cart body. Its structure is solid, delicate, and stable, enabling it to display the highest mobility in emergencies

Model 10/20/30 Electronic NAF S125 Clean Ceiling Mounted type Automatic Fire Extinguisher

The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately.

Model 10/20/30 Electronic HFC227ea Clean Ceiling Mounted type Automatic Fire Extinguisher

Model 50 ABC Dry Chemical Fire Extinguisher

Model 150 ABC Dry Chemical Fire Extinguisher

Model 150 KBC Dry Chemical Fire Extinguisher

This product is composed of HFC227ea clean,Cylinder, closed sprinkler, and fixed frame. The composition of the device is simple and reacts to fire fast. Once the temperature at the scene reaches the cracking temperature of the glass on the closed sprinkler, the dry chemical will be released to extinguish the fire.

The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately.

The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately.

The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately.

The 360° two-way rotating joint is installed underneath the air foam generator. In case deformation occurs on the raw material storage tank due to overtemperature, the joint attached to the stand pipe fixed on the wall of the storage tank can absorb the bending stress generated by the deformation so that the stand pipe will not be damaged immediately.

Model 20 ABC Dry Chemical Fire Extinguisher (Enhanced Type)

Model 20 ABC Dry Chemical Fire Extinguisher (General Type)

This product is made of aluminum alloy. It is lightweight and there are front and rear handles and adjustable straps (except for type AFN1523), making it suitable for operators of all sizes.

This product is driven by the water pressure of the hydrant water. The water route can be switched by the fixed angle reverse direction changing device so that the monitor can swing automatically within the set angles. The swinging monitor can be placed on a stand, where it can spin 360° and the direction can be fixed. The angle of the water outlet of the monitor can be adjusted vertically and fixed. The total weight of the monitor is less than 78kg with two 2.5" internal thread joint inlets. As such, it can be operated with 1 or 2 water hoses connected.

Model 20 KBC Dry Chemical Fire Extinguisher

Clean fire extinguishing products are new products to replace the original halon fire extinguishers. The advantages of these new products are that the dry chemical does not need to renewed (it is still necessary to inspect whether the pressure gauge stays within the green zone) and the agent does not cause pollution. Although these new products can put out the Type A fires (general fires), Type B fires (oil fires), and Type C fires (electrical fires), the fire extinguishing efficiency is lower than dry chemical products.

This product is a stationary monitor with an angle that can be adjusted horizontally and vertically and can switch between water mist and a water column. It can accomplish heat insulation with a water curtain, cooling, and fire extinguishing for dangerous areas where fires can break out easily, such as oil tank areas, chemical plants, machinery rooms, solvent warehouses, oil filling plants, etc.

This product is large flow monitor with functionality for adjusting the water flow in five segments. In addition, it has a stationary monitor with an angle that can be adjusted horizontally and vertically and can switch between water mist and a water column. It can accomplish heat insulation with a water curtain, cooling, and fire extinguishing for dangerous areas where fires can break out easily, such as oil tank areas, chemical plants, machinery rooms, solvent warehouses, oil filling plants, etc.

Suitable for fires caused by active metals, such as lithium, zirconium, titanium, potassium, and magnesium, and substances which, in contact with water, emit flammable gases.type d fire extinguisher.

Model : CD-MFM252

Model : CD-MFM251

With more than 60 years of fire protection equipment development capabilities and manufacturing technologies, the Company’s equipment - such as labor-saving outdoor anti-collision fire hydrants, automatic swinging monitor, hand lever monitor, mobile monitor, turbine nozzles, low recoil nozzles, and large flow water mist/water column nozzles - has been widely adopted in the petrochemical industry, heavy industry, energy electricity generation industry, and information electronics industry, having become a most essential part in fire emergency relief. Model : CD-FH150A

With more than 60 years of fire protection equipment development capabilities and manufacturing technologies, the Company’s equipment - such as labor-saving outdoor anti-collision fire hydrants, automatic swinging monitor, hand lever monitor, mobile monitor, turbine nozzles, low recoil nozzles, and large flow water mist/water column nozzles - has been widely adopted in the petrochemical industry, heavy industry, energy electricity generation industry, and information electronics industry, having become a most essential part in fire emergency relief. Model : CD-FH150B

With more than 60 years of fire protection equipment development capabilities and manufacturing technologies, the Company’s equipment - such as labor-saving outdoor anti-collision fire hydrants, automatic swinging monitor, hand lever monitor, mobile monitor, turbine nozzles, low recoil nozzles, and large flow water mist/water column nozzles - has been widely adopted in the petrochemical industry, heavy industry, energy electricity generation industry, and information electronics industry, having become a most essential part in fire emergency relief.

This product is made of aluminum alloy. The nozzle is light with a handle, which is helpful for the operator. There is a reverse U-shape handle ball lever, which can be used for spraying and closing the outlet. Model : CD-WN15 (1.5")/CD-WN25 (2.5")

This product is made of aluminum alloy. The nozzle is light and with a handle. In addition, the angle of the nozzle body is 30°. From the perspective of ergonomics, this design lowers the recoil generated by the spraying. It not only reduces the burden on the operator, but also can be quickly moved during operations.